Compared with standard milling cutters, high -speed steel ball head milling cutters are characterized by:
The appearance is simple, bright, unique, novel, and layered;
Geometric accuracy is increased by 40%compared to standard products. It is recommended for crude milling, semi -essence milling, and suitable for essence milling;
Increase the smoothness of the front and rear corners, making the blade sharp and slightly brisk.
The width of the rear angle increased by 15%. Interest improvement, stable and reliable;
After the unique process, the service life is twice the standard milling cutter, which has a high cost performance.
General equipment that can be used for traditional milling methods and can be used for CNC equipment.
The milling cutter is used for high -hardness material processing, and the hardness HRC50 ~ 55 degrees of processing workpiece.
Use ZUI new coating and nano -grade tungsten steel raw materials.
Using short -edge design, suitable for high -speed milling; dry cutting can also be achieved.
The trail header and diameter flat head -shaped milling cutter is designed with sharp rounded angle (a little R angle). The micro -diameter ball head milling cutter can reduce the blade and increase the service life of the tool.
High -speed steel ball head milling cutter can milling mold steel, cast iron, carbon steel, alloy steel, tool steel, and general iron, belongs to the vertical milling cutter. The head milling cutter can work normally in high temperature environments.
High -speed steel ball head and milling cutter: widely used for various curved surfaces, arc groove processing.
High temperature resistance: ZUI high temperature 450-550/500-600 degrees Celsius.
The blade of the high -speed steel ball head milling cutter large R angle is stronger than the tip of the end milling cutter, and it is not easy to collapse, that is, the life span is stable than the end milling cutter. In addition, when it is used for 3D processing, the processing area of the ball knife is R Corner blade, processing spacing and cutting depth can be used to use larger values. The processing efficiency is improved and the quality of the processing surface is improved.
