Payment & Shipping Terms:
|Produce Name:||55hrc End Mill||Coating:||Altin/TiAln/Tisin/Nano|
|Material:||Carbide||Diameter:||1, 1.5, 2, 2.5, 3, 3.5, 4, 5, 6, 8, 10, 12, 14MM|
|Overall Length:||50, 60, 75, 100MM||Feature:||Higher Wear Resistance|
solid carbide roughing end mills,
flat countersink drill bit
1. Higher wear resistance and sharpness of end mill:
2. Reduce the number of tool change, save time and improve the use efficiency
3. The corresponding degree of heat treatment materials can be directly processed from rough to fine processing.
Before using the props, please measure the tool deflection. When the tool deflection accuracy exceeds 0.01mm, please correct it before cutting.
The shorter the length of the tool protruding from the chuck, the better. If the tool extends longer, the speed, feed rate or cutting amount should be reduced.
In case of abnormal vibration or sound during cutting, please reduce the number of revolutions and cutting amount until the situation is improved.
Contact Person: Alice Zhong